COMFILE Technology's Documentation Library

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== How to Use CUBLOC Studio ======

[[http://www.comfiletech.com/pages/support.html|Download Cubloc Studio]]

After installing Cubloc Studio and executing it, you will see the following screen.

{{ :cubloc:how_to_use_cubloc_studio:cublocstudio.png?nolink |}}

You will see that, at first, Cubloc Studio will default to the BASIC editor.

If you press F2, the screen will change to the Ladder Logic editor and if you
press F1, it will switch back to the BASIC editor. 

Source files are saved as two files under the file extensions .CUL and .CUB.
If you need to backup or move source files, you must keep BOTH of these
files together.

{{ :cubloc:how_to_use_cubloc_studio:cublocstudio_saveas.png?nolink |}}

When opening a file, you will only see .CUL files. (.CUB files are not
displayed, but they are in the same folder). When you open a .CUL file,
Cubloc Studio automatically opens CUB file.

The source code can only be saved on the PC. Source code downloaded to
the Cubloc module can not be uploaded back to the PC.

When you press the RUN button (or CTRL-R), Save, Compile, Download, and
Execute are all automatically processed.

Ladder Logic and BASIC both are compiled with one RUN button. If an error is found during compilation, the
cursor will relocate to the error position.

**IMPORTANT:** All Cubloc modules implement code obfuscation. By obfuscating the downloaded program data, the code is safe
from any attempt to read part of the chip’s memory and copy the source code.

===== Creating BASIC Code =====

You can create BASIC code as shown below. Cubloc Studio's text editor is
similar to most text editors, and performs syntax highlighting of certain
commands.

{{ :cubloc:how_to_use_cubloc_studio:cubloc_basicedit.png?nolink |}}

^Shortcut ^Explanation^
|CTRL-Z |UNDO|
|CTRL-O |OPEN|
|CTRL-S |SAVE|
|CTRL-C |COPY|
|CTRL-X |CUT|
|CTRL-V |PASTE|
|CTRL-F |FIND|
|CTRL-HOME |Go to the very beginning|
|CTRL-END |Go to the very end|
|CTRL-Y |REDO|

===== Debugging =====

{{ :cubloc:how_to_use_cubloc_studio:cubloc_debug.png?nolink |}}

As shown in the screenshot above, the Debug statement can be used to
monitor your BASIC program while it’s running. 


===== Cubloc Studio Menus ====

==== Files ====

^Menu ^^ Explanation^
|New || Create new file.|
|Open || Open file.|
|Ladder Import || Import Ladder Logic part of a Cubloc program.|
|Save || Save current file.|
|Save As || Save current file under a different name.|
|Save Object || Save current program as an object file. Use this to \\ protect your source code. An object file is a \\ strictly binary format file so others cannot easily reverse \\ engineer it. You can use "Download from Object File" to \\ download an object file to Cubloc.|
|Print Ladder || Print Ladder Logic section only.|
|Print BASIC || Print BASIC section only.|
|Print Setup || Setup printer for printing Ladder Logic editor.|
|Download from Object file || Download an object file to the Cubloc module.|
| Utility for CUTOUCH  | BMP download forCT1721C | Download Bitmap to CT1721C|
| ::: | Touch calibration for CT1721C|Calibrate CT1721C's Touch-screen |
| ::: | BMP download for CT1820|Download Bitmap to CT1820|
| ::: | Touch calibration for CT1820|Calibrate CT1820's Touch-screen|
| ::: | Store Current Time to CT1820 RTC|Synchronize this PC's current time with the CT1820's RTC|
|Last 4 Files Edited || View last 4 files edited. |
|Exit || Exit Cubloc Studio|

==== Device ====

If you select a device in use here, an Const device statement is inserted. But #include statements for MSB series are not supported.

{{ :cubloc:how_to_use_cubloc_studio:device.png?nolink |}}

==== Example ====
<code xbasic>
Const Device = CB220      ' Use CB220.
</code>

==== Run ====

^Menu ^Explanation^
|Download & Run| Compile BASIC and Ladder Logic, download to\\ Cubloc module if there are no errors, and restart \\  the program automatically. To disable automatic \\ restart, please go to Setup->Studio Option to change.|
|Ladder Logic Run |Continue execution of Ladder Logic while monitoring|
|Ladder Logic Stop |Stop execution of Ladder Logic while monitoring|
|Reset |Reset the Cubloc module.|
|Ladder Monitor on |Start Ladder Logic monitoring|
|BASIC Debug Terminal |Open BASIC Debug Terminal Window.\\ This window opens automatically when there’s a\\ Debug statement in the source code.|
|Clear Cubloc’s Flash |Clear Cubloc’s Flash Memory.|
|Write enable fuse off |This will turn off the download function for a Cubloc \\ Core module to protect against noisy environments \\ where the flash memory can be affected. Once you \\ choose this menu, you will be unable to download \\ new programs to your Cubloc module. You will \\ be able to download again after a Firmware Download.|
|Run with Firmware download | View relays in use by Ladder Logic after compilation.|
|View Relay Usage |See, at a glance, the status of relays in a separate window.|
|View Watch window |See, at a glance, the status of relays in a separate window.|
|Check Syntax |Check the source code's syntax|

==== Setup ====

^Menu ^Explanation^
|PLC Setup Wizard |Wizard to automatically generate BASIC code.|
|PC Interface Setup |Setup the RS232 COM PORT for Download/Monitor.  You must select a COM port number between 1~8.|
|Editor Environment Setup|Configuration options for the BASIC editor.|
|Ladder Logic Environment Options| Configuration options for Ladder Logic.|
|Use English/Korean menu |Change the language of the menus to English/Korean|
|Firmware Download |Download Firmware to Cubloc. Please use this to download firmware to Cubloc manually.|


[[cubloc:index:|Go CUBLOC home]]