Table of Contents
Uploading a Program
The FADUINO can be programmed with the Arduino IDE downloadable from http://arduino.cc/
USB Driver
Selecting the Arduino Hardware
FA-DUINO-32TA/12RA/24RA
- Tools> Board> Arduino Mega or Mega 2560
- Tools> Processor> ATmega2560 (Mega2560)
 |  |
FA-DUINO-18TA
- Tools> Board> Arduino Uno
Selecting the Serial Port
- Confirm the Serial Port number in Device Manager.
- Select the serial port from the Arduino IDE menu Tools> Port> COMx
 |  |
Upload the Program
After writing the code, upload the program.
USB-C Upload Cable
Use a USB-C cable for upload.
The FADUINO-18TA has an upload selection switch, be sure to set it to upload mode.
