User Tools

Site Tools



Set OnTimer

Set OnTimer On|Off

At power on, Set OnTimer is On by default.

This command turns on or off the ability to receive On Timer interrupts. An interrupt occurs at every time interval set by the On Timer command.

When Set OnTimer is On, the interrupt service routine (ISR) set using the On Timer command will be executed when the corresponding interrupt occurs. If Set OnTimer is Off, then the ISR will not be executed when the interrupt occurs. See also the On Timer command.

Go CUBLOC home

cubloc/set_ontimer/index.txt · Last modified: 2016/04/14 11:07 (external edit)