User Tools

Site Tools

한국어

cuwin:mouting_screws_and_brackets

Mounting Screws and Brackets

Mounting brackets and bolts are included with each CUWIN. Insert a bolt into each mounting bracket as shown in the diagram below.

They brackets are designed to clamp the CUWIN bezel against a front panel, with the rear portion of the device protruding through a panel cutout.

After assembling the brackets as shown below, insert the side hooks into the appropriate mounting holes on the top and bottom of the device. Then tighten the screws enough to hold the CUWIN securely against the front panel. Do not over tighten, or you will risk damaging the CUWIN.


CUWIN 5200, 6300, CWA, CWV, CWV2



CUWIN 6400

cuwin/mouting_screws_and_brackets.txt · Last modified: 2017/06/07 03:28 by COMFILE Technology