User Tools

Site Tools

한국어

fa-duino-32ta:index

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
fa-duino-32ta:index [2019/04/16 11:28]
COMFILE Technology [Interfacing with Peripherals]
— (current)
Line 1: Line 1:
-====== FA-DUINO-32TA Industrial Arduino ====== 
  
-{{ :​fa-duino-32ta:​fa-duiino-32ta.png }} 
- 
- 
-The FA-DUINO-32TA is an industrial controller built on the Arduino platform. It can be programmed using the Arduino IDE. 
- 
-The FA-DUINO-32TA is a BOARD-type controller with more functionality than traditional FA-DUINO-12RA,​-24RA. Arduino provides various functions (I2C, PWM, INT). It is also designed for factory automation environments. Receive high voltage input signals, high voltage/​high current control, current measurement etc. 
- 
-The FA-DUINO will be useful to users who are familiar with the Arduino platform when developing controllers that can be applied directly to automation sites. 
- 
-===== Specifications ===== 
- 
-  * Atmel ATMega2560 
-  * Program Memory: 256KB 
-  * SRAM: 8KB 
-  * EEPROM memory: 4KB 
-  * Clock Speed: 16MHz 
-  * Power Input: 24VDC 
- 
- 
-===== Input/​Output Features ===== 
- 
-{{ :​fa-duino-32ta:​fa-duino-32ta2.png }} 
- 
-^                         ^ Description ​                   ^ Specifications ​                                      ^ 
-^ Inputs ​                 | DC Input x 16                  | DC 20~28V, 24V recommended\\ High >= 18V / Low <= 15V\\ @ 24VDC 2.2K Ohm   ​| ​               ​ 
-^ Outputs ​                | DC Sink Output x 14            | NPN Transistor Output (ON creates a path to ground)\\ Max 24V / 250mA  | 
-^ Analog Input (Voltage) ​ | Analog Voltage Conversion x 4  | 0 ~ 10V (Min -0.5V, Max 10.5V)\\ 10-bit +/-2% (0~1023)\\ Not Isolated\\ Internal Low-Pass Filter| 
-^ Analog Input (Current) ​ | Analog Current Conversion x 4  | 0 ~ 20mA (Max 22mA)\\ 10-bit +/-2% (0~1023) ​                    | 
-^ PWM/​GPIO ​               | Configurable PWM/GPIO x 6      | 5V-level ​                           | 
-^ External Interrupt ​     | Interrupt Input x 2            | DC 20~28V, 24V recommended\\ Above 18V generates an interrupt ​   | 
-^ RS232                   | 2 Channels ​                    | CH1, CH2\\ RS232C (+/- 10VDC)\\ Max Baud Rate 115200\\ Maximum Distance 2m                            | 
-^ RS485                   | 1 Channel ​                     | CH3\\ Automatic DTR Control ​              | 
-^ I2C                     | 1 Channel ​                     | SDA-P20, SCL-P21 ​                   | 
- 
- 
-===== Hardware ===== 
- 
-  * [[.:​Input/​Output Connection:​|Input/​Output Connection]] ​ 
-  * [[.:​Proximity Sensor Connection:​|Proximity Sensor Connection]] 
- 
-===== General Usage ===== 
- 
-  * [[.:Program Upload:]] 
-  * [[.:I/O Control:​|General Syntax for I/O Automation]] 
- 
-===== Example Programs ===== 
- 
-  * [[.:Status LED Blink:]] 
-  * [[.:Digital Output Sink ON/OFF:]] 
-  * [[.:Digital Input/​Output:​|Digital Input to Output]] 
-  * [[.:Analog Input Serial Monitoring:​]] 
- 
-===== Interfacing with Peripherals ===== 
- 
-  * [[.:​Interfacing with the UIF-5K:]] 
-  * [[.:​Interfacing with the CLCD:]] 
fa-duino-32ta/index.1555381711.txt.gz · Last modified: 2019/04/16 11:28 by COMFILE Technology