The RS-SADIN6 is a high-speed, 6-channel, 12-bit analog-to-digital conversion module capable of reading all 6 channels in approximately 6ms. Switching between voltage and current readings does not require a separate dipswitch. To read current ranges from 0 ~ 20mA, simply connect a 250 Ohm resistor (1% tolerance) across the + and - input terminals.
|Module Name||Output Value||Resolution||Precision||Conversion Speed|
|RS-SADIN6||0 ~ 4095||12-bit +/-0.1%||< 100μs per channel|
The RS-SADIN6’s sampling frequency is the fastest of all analog input modules at 10s of microseconds. There is no need to wait for sampling before calling getSadc.
|Operating Temperature||-10 ~ 50 oC (no condensation)|
|Operating Humidity||35 ~ 85%RH|
|0~5V Input||Impedance 450kohm.|
|Maximum Input Voltage||0 ~7V (voltages outside of this range risk damage)|
|6-Channel Conversion Speed||6ms|
|Isolation Method||No Isolation|
The AD Input Modules' inputs are not isolated, so please be sure not to provide voltage or current in excess of the specified ranges. Doing so could cause permanent damage.
The AIO (Analog Input & Output) modules can be installed in any slot on either the 10-slot main board or the 5-slot expansion board, except the CPU slot.