======CFTC-1L======

Currently, this product is available for use with Modular FADUINO. It cannot be used with CFHDR-8U or ModularPi.

This is a module that can measure temperature using thermocoupler K, J, T, N, E, S, B, and R type sensors.

[[https://comfiletech.com/modular-faduino/cftc-1l-thermocouple-temperature-module/|View at our online store]].
=====Electrical specifications=====
  * Sensor input points: 1 channel
  * Conversion unit: 0.0625°C
  * Error rate: ±1.5°C
  * Isolation: No isolation

=====Measurement range by sensor type=====
  * Type K: -200°C ~ 1350°C
  * Type J: -150°C to +1200°C
  * Type T: -200°C to +400°C
  * Type N: -150°C to +1300°C
  * Type E: -200°C to +1000°C
  * Type S: 250°C to +1664°C
  * Type B: 1000°C to +1800°C
  * Type R: 250°C to +1664°C

* Although the CFTC-1L's hardware and design is rated for the broad ranges listed above, and can be used with probes rated for those ranges, the CFTC-1L has only been validated for temperatures in the range of -50℃ ~ 500℃.

=====Wiring method=====

{{.:cftc-1.png?nolink |}}

===== Setting the module's address =====
  * Up to 8 CFTC-1L modules can be used in one system, each with a different address in the range of 0x00~0x07.
  * The address setting method is different from other I/O modules:  Only one of the DIP switches should be turned ON at any time.

{{ .:cftc-1dsw.png?nolink |}}

[[index|CFNET]]