====== Set OnRecv ======

''Set OnRecv0 On|Off'' \\ 
''Set OnRecv1 On|Off'' \\ 
''Set OnRecv2 On|Off'' \\ 
''Set OnRecv3 On|Off'' \\ 

At power on, Set OnRecv is On by default.

This command turns on or off the ability to receive On Recv interrupts. An
On Recv interrupt occurs after data is received on the serial port AND stored
in serial port's the receive buffer.

When Set OnRecv is On, the interrupt service routine (ISR) set using the On
Recv command will be executed when the corresponding interrupt occurs.
If Set OnRecv is Off, then the ISR will not be executed when the interrupt
occurs. See also the On Recv command.

<code xbasic>
Set OnRecv1 On
Set OnRecv1 Off

</code>

[[cubloc:index#system_library:|Go CUBLOC home]]