Table of Contents
CFTC-1L
Currently, this product is available for use with Modular FADUINO. It cannot be used with CFHDR-8U or ModularPi.
This is a module that can measure temperature using thermocoupler K, J, T, N, E, S, B, and R type sensors.
Electrical specifications
- Sensor input points: 1 channel
- Conversion unit: 0.0625°C
- Error rate: ±1.5°C
- Isolation: No isolation
Measurement range by sensor type
- Type K: -200°C ~ 1350°C
- Type J: -150°C to +1200°C
- Type T: -200°C to +400°C
- Type N: -150°C to +1300°C
- Type E: -200°C to +1000°C
- Type S: 250°C to +1664°C
- Type B: 1000°C to +1800°C
- Type R: 250°C to +1664°C
* Although the CFTC-1L's hardware and design is rated for the broad ranges listed above, and can be used with probes rated for those ranges, the CFTC-1L has only been validated for temperatures in the range of -50℃ ~ 500℃.
Wiring method
Setting the module's address
- Up to 8 CFTC-1L modules can be used in one system, each with a different address in the range of 0x00~0x07.
- The address setting method is different from other I/O modules: Only one of the DIP switches should be turned ON at any time.
