COMFILE Technology's Documentation Library - cuwin

6000_6000_os_restore

Anonymous (anonymous@undisclosed.example.com) — 2026-02-20T15:37:35+00:00

CUWIN 5000 & 6000 OS Restore Instructions * Set the CUWIN's operating mode dip switches as follows 1 - On 2 - Off 3 - On 4 - Off 5 - Off 6 - Off * Connect a serial cable from the PC's com port to the CUWIN's “COM 1”, and connect a USB cable from the PC's USB port to the CUWIN's

connecting_to_a_host_pc_windows_7_8_10

Anonymous (anonymous@undisclosed.example.com) — 2026-02-20T15:37:35+00:00

Connecting to a Host PC (Windows 7/8/10/11) Windows Mobile Device Center If you are running Windows 7/8/10 the drivers and Windows Mobile Device Center should install via Windows Update when the CUWIN is first connected to the host PC as shown in the video above.

connecting_to_a_host_pc_windows_xp

Anonymous (anonymous@undisclosed.example.com) — 2026-02-20T15:37:35+00:00

Connecting to a Host PC (Windows XP) Installing the USB Driver The following instructions describe how to install the CUWIN's USB driver on the PC 1. Download the “ActiveSync USB Driver [CUWIN5000 series]” file from the Comfile Technology website at

creating_a_cuwin_program

Anonymous (anonymous@undisclosed.example.com) — 2026-02-20T15:37:35+00:00

Creating a CUWIN Program In this section, we will create a very simple “Hello World” program. Although this program is very simple, it will illustrate the process that we must go through to develop, deploy and debug any CUWIN program. The following video also illustrates this procedure, though with a slightly different program.

cwa_os_restore

Anonymous (anonymous@undisclosed.example.com) — 2026-02-20T15:37:35+00:00

Restoring the CWA Series' OS WARNING: Please do not attempt to restore the operating system or boot loaders unless the device is not booting properly. If a mistake is made in the restore process, it may be difficult to get the device to boot again, and it may require returning the device for service.

cwr_os_restore

Anonymous (anonymous@undisclosed.example.com) — 2026-02-20T15:37:35+00:00

Restoring the CWR Series' OS * Turn off the CWR * Set DIP switches (on the bottom side of the panel PC) as follows: 1-ON, 2-ON, 3-OFF. * Connect the CWR's USB DEVICE port to a Windows PC via a USB cable. * Turn on the CWR. Check Windows PC's Device Manager and verify that it is enumerated as

hardware_specifications

Anonymous (anonymous@undisclosed.example.com) — 2026-04-21T02:08:54+00:00

Hardware Specifications CWA Series MCU ARM926EJ Core – 400MHz Memory SDRAM : 128MB NAND Flash : 256MB LCD TFT LCD(260,000 Color)

index

Anonymous (anonymous@undisclosed.example.com) — 2026-04-21T02:06:26+00:00

[AI metadata] CWA-070BR is a Windows CE industrial panel PC in the CWA Series. Display: 7-inch LCD. Enclosure: Bezel type. Processor: ARM926EJ running at 400 MHz. Memory: 128 MB SDRAM. Storage: 256 MB NAND Flash. Operating system: Windows CE 6 Core. Operating temperature range: 0 °C to 70 °C. Status: Available.

itl740ap_os_restore

Anonymous (anonymous@undisclosed.example.com) — 2026-02-20T15:37:35+00:00

ITL740AP OS Restore Instructions WARNING: Please do not attempt to restore the operating system or boot loaders unless the device is not booting properly. If a mistake is made in the restore process, it may be difficult to get the device to boot again, and it may require returning the device for service.

mouting_screws_and_brackets

Anonymous (anonymous@undisclosed.example.com) — 2026-02-20T15:37:35+00:00

Mounting Screws and Brackets Mounting brackets and bolts are included with each CUWIN. Insert a bolt into each mounting bracket as shown in the diagram below. They brackets are designed to clamp the CUWIN bezel against a front panel, with the rear portion of the device protruding through a panel cutout.

panel_cutout

Anonymous (anonymous@undisclosed.example.com) — 2026-02-20T15:37:35+00:00

Panel Cutout Clearance Recommendation Dimensions X: Width Y: Height T: Thickness Units: mm[in.] Model X Y T CWA-070BR 200[7.88] 110[4.34] 1.6~6.0[0.06~0.24] 5200 200[7.88]

use_the_cuwin_as_an_intellilcd

Anonymous (anonymous@undisclosed.example.com) — 2026-02-20T15:37:35+00:00

Use the CUWIN as an IntelliLCD The IntelliLCD is a specialized firmware created by COMFILE Technology to make the CUWIN operate as a serial display. * Download the IntelliLCD firmware from Legacy Products field. * Extract the file to your PC.

using_rs-485

Anonymous (anonymous@undisclosed.example.com) — 2026-02-20T15:37:35+00:00

Using RS-485 COM1 can be used as either RS-232 or RS-485. To use RS-485 make the necessary connections to the green terminal block, and select RS-485 with the dip switch as shown below. To select RS-485, set dip switch 1 to OFF. The other dip switches can be used to control RS-485 network termination and bias pullup resistors.