컴파일 온라인 사용설명서

void setup() {
    Serial1.begin(115200); //보레이트 115200 설정
    uif_clear(); //전체 화면을 지움
    delay(20);
    uif_light(1); delay(20); //back light를 on
    uif_buzzer(1); delay(20); //부처 소리 on
    delay(100);
    uif_locate(0,0);
    Serial1.print("=== UIF 5K_TEST ===");delay(100);
    uif_locate(2,1);
    Serial1.print("comfiletech.com"); delay(100);
    uif_locate(2,2);
    Serial1.print("COUNTER : "); delay(100);
    uif_locate(2,3);
    Serial1.print("BUTTON : "); delay(100);
}
 
int cnt = 0;
 
void loop() 
{
    cnt++; //카운터 값을 증가
    uif_locate(12,2);
    Serial1.print(cnt, DEC);           //카운터 값을 표시
    delay(100);
    serial1Event();
}
 
void serial1Event() 
{                                     //입력된 버튼 값을 표시 합니다.
    while (Serial1.available()) {
    char inChar = (char)Serial1.read();
    uif_locate(10,3);
    Serial1.print(inChar, DEC);
   }
}
 
//커서설정 인자 값 0 or 1
 
void uif_csron(unsigned char on_off)
{
    if(on_off){Serial1.write(0x1b); Serial1.write(0x53);}
    else {Serial1.write(0x1b); Serial1.write(0x73);}
}
 
//전체 화면을 지웁니다.
 
void uif_clear()
{ 
    Serial1.write(0x1b); Serial1.write(0x43); 
}
 
//back light 설정 인자 값 0 or 1
 
void uif_light(unsigned char on_off)
{
    Serial1.write(0x1b);Serial1.write(0x42);Serial1.write(0x4c);
    Serial1.write(on_off); }
 
//표시될 문자의 x축과 y축의 위치를 설정합니다
 
void uif_locate(unsigned char x, unsigned char y)
{ 
    Serial1.write(0x1b);Serial1.write(0x4C);Serial1.write(x); Serial1.write(y); 
    }
 
//버튼확인 led 설정 인자 값 0 or 1
 
void uif_swled(unsigned char on_off)
{ 
    Serial1.write(0x1b);Serial1.write(0x45);Serial1.write(on_off); 
}
 
//해당 led를 on/off 합니다.
 
void uif_led(unsigned char number, unsigned char on_off)
{
    Serial1.write(0x1b);Serial1.write(0x46);Serial1.write(number);
    Serial1.write(on_off); 
}
 
//부저동작 on/off 값 0 or 1
 
void uif_buzzer(unsigned char on_off)
{ 
    Serial1.write(0x1b);Serial1.write(0x5a);Serial1.write(on_off); 
}