modport:md-daout2b:index
This is an old revision of the document!
Table of Contents
Analog Current Output Module: MD-DAOUT2B
Specification
| Item | Description |
|---|---|
| Operating Temperature | -10 ~ 50℃ (no condensation) |
| Operating Humidity | 35 ~ 85%RH |
| Input Resistance | 20KΩ |
| Analog Output | 0~20mA Or 4~20mA (600Ω or higher differential load) |
| Output Value | 0 ~ 60,000 |
| Conversion Speed | 30ms per channel |
| Communication Method | RS485 |
| Maximum Conversion Rate | 0 ~ 60,000, 600ms |
| Isolation Method | No Isolation |
Module ID (Modbus Slave Address) Assignment
On the front of the module, there is a rotary switch labeled ID, that is used to select the Modbus slave address for the module. When installing multiple modules of the same type, the ID for each module should be unique.
Rotary switch position 0 corresponds to Modbus slave address 10. If the ID is changed after the module is powered on, it must be power cycled for the new ID to take effect.
modport/md-daout2b/index.1682740460.txt.gz · Last modified: 2023/04/29 12:54 by COMFILE Technology