modport:md-dorl8:index
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision | ||
|
modport:md-dorl8:index [2023/02/13 21:15] COMFILE Technology [Module ID Adjustment] |
modport:md-dorl8:index [2023/05/31 04:34] (current) COMFILE Technology [8-Channel Relay Output Moduel : MD-DORL8] |
||
|---|---|---|---|
| Line 1: | Line 1: | ||
| ====== 8-Channel Relay Output Moduel : MD-DORL8 ====== | ====== 8-Channel Relay Output Moduel : MD-DORL8 ====== | ||
| - | {{ :modport:md-dorl8:md-dorl8.png?nolink |}} | + | {{ :modport:md-dorl8:md-dorl8.png?700 |}} |
| This is a 4A load per channel relay output module capable of up to AC 240V. | This is a 4A load per channel relay output module capable of up to AC 240V. | ||
| Line 8: | Line 8: | ||
| After prolonged used, the relay's mechanical contacts may become worn and will need to be replaced. | After prolonged used, the relay's mechanical contacts may become worn and will need to be replaced. | ||
| - | (Individual relays are not available, so the entire module wil need to be replaed.) | + | (Individual relays are not available, so the entire module will need to be replaced.) |
| - | Channel's starting address for DORL8 (Relay Output Module) | + | Each module has 8 channels, each with its own unique Modbus address |
| ^Channel ^0 ^1 ^2 ^3 ^4 ^5 ^6 ^7^ | ^Channel ^0 ^1 ^2 ^3 ^4 ^5 ^6 ^7^ | ||
| |Starting Address(base 10) |3200 |3201 |3202 |3203 |3204 |3205 |3206 |3207 | | |Starting Address(base 10) |3200 |3201 |3202 |3203 |3204 |3205 |3206 |3207 | | ||
| |Starting Address(base 16) | C80 | C81 | C82 | C83 | C84 | C85 | C86 | C87 | | |Starting Address(base 16) | C80 | C81 | C82 | C83 | C84 | C85 | C86 | C87 | | ||
| - | | Address (base 10) used by the HMI (SCADA) | 03201 | 03202 | 03203 | 03204 | 03205 | 03206 | 03207 | 03208 | | + | |Address (base 10) used by HMI (SCADA) | 03201 | 03202 | 03203 | 03204 | 03205 | 03206 | 03207 | 03208 | |
| - | ===== Module ID Adjustment ===== | + | ===== Module ID (Modbus Slave Address) Assignment ===== |
| - | On the front of the module, there is a rotary switch used to select the Modbus slave address for the module. When installing multiple modules of the same type, the Modbus slave address for each module should be unique. | + | On the front of the module, there is a rotary switch labeled //ID//, that is used to select the Modbus slave address for the module. When installing multiple modules of the same type, the ID for each module should be unique. |
| - | Rotary switch position 0 corresponds to Modbus slave address 10. if the ID is changed after the power is applied, be sure to turn the Modport power OFF and then ON again. | + | Rotary switch position 0 corresponds to Modbus slave address 10. If the ID is changed after the module is powered on, it must be power cycled for the new ID to take effect. |
| + | |||
| + | [[modport:index|MODPORT]] | ||
modport/md-dorl8/index.1676290531.txt.gz · Last modified: 2023/02/13 21:15 by COMFILE Technology