This shows you the differences between two versions of the page.
Both sides previous revision Previous revision Next revision | Previous revision | ||
modport:md-dorl8:index [2023/02/13 21:17] COMFILE Technology [Module ID Adjustment] |
modport:md-dorl8:index [2023/05/31 04:34] (current) COMFILE Technology [8-Channel Relay Output Moduel : MD-DORL8] |
||
---|---|---|---|
Line 1: | Line 1: | ||
====== 8-Channel Relay Output Moduel : MD-DORL8 ====== | ====== 8-Channel Relay Output Moduel : MD-DORL8 ====== | ||
- | {{ :modport:md-dorl8:md-dorl8.png?nolink |}} | + | {{ :modport:md-dorl8:md-dorl8.png?700 |}} |
This is a 4A load per channel relay output module capable of up to AC 240V. | This is a 4A load per channel relay output module capable of up to AC 240V. | ||
Line 8: | Line 8: | ||
After prolonged used, the relay's mechanical contacts may become worn and will need to be replaced. | After prolonged used, the relay's mechanical contacts may become worn and will need to be replaced. | ||
- | (Individual relays are not available, so the entire module wil need to be replaed.) | + | (Individual relays are not available, so the entire module will need to be replaced.) |
- | Channel's starting address for DORL8 (Relay Output Module) | + | Each module has 8 channels, each with its own unique Modbus address |
^Channel ^0 ^1 ^2 ^3 ^4 ^5 ^6 ^7^ | ^Channel ^0 ^1 ^2 ^3 ^4 ^5 ^6 ^7^ | ||
|Starting Address(base 10) |3200 |3201 |3202 |3203 |3204 |3205 |3206 |3207 | | |Starting Address(base 10) |3200 |3201 |3202 |3203 |3204 |3205 |3206 |3207 | | ||
|Starting Address(base 16) | C80 | C81 | C82 | C83 | C84 | C85 | C86 | C87 | | |Starting Address(base 16) | C80 | C81 | C82 | C83 | C84 | C85 | C86 | C87 | | ||
- | | Address (base 10) used by the HMI (SCADA) | 03201 | 03202 | 03203 | 03204 | 03205 | 03206 | 03207 | 03208 | | + | |Address (base 10) used by HMI (SCADA) | 03201 | 03202 | 03203 | 03204 | 03205 | 03206 | 03207 | 03208 | |
- | ===== Module ID Adjustment ===== | + | ===== Module ID (Modbus Slave Address) Assignment ===== |
On the front of the module, there is a rotary switch labeled //ID//, that is used to select the Modbus slave address for the module. When installing multiple modules of the same type, the ID for each module should be unique. | On the front of the module, there is a rotary switch labeled //ID//, that is used to select the Modbus slave address for the module. When installing multiple modules of the same type, the ID for each module should be unique. | ||
Rotary switch position 0 corresponds to Modbus slave address 10. If the ID is changed after the module is powered on, it must be power cycled for the new ID to take effect. | Rotary switch position 0 corresponds to Modbus slave address 10. If the ID is changed after the module is powered on, it must be power cycled for the new ID to take effect. | ||
+ | |||
+ | [[modport:index|MODPORT]] |