Differences

This shows you the differences between two versions of the page.

--- modport:md-dorl8:index [2023/04/27 09:49]
COMFILE Technology [8-Channel Relay Output Moduel : MD-DORL8]
+++ modport:md-dorl8:index [2023/05/31 04:34] (current)
COMFILE Technology [8-Channel Relay Output Moduel : MD-DORL8]
@@ Line 1: / Line 1: @@
 ====== 8-Channel Relay Output Moduel : MD-DORL8 ======
-{{ :modport:md-dorl8:md-dorl8.png?nolink |}}
+{{ :modport:md-dorl8:md-dorl8.png?700 |}}
 This is a 4A load per channel relay output module capable of up to AC 240V.
@@ Line 15: / Line 15: @@
 |Starting Address(base 10) |3200 |3201 |3202 |3203 |3204 |3205 |3206 |3207 |
 |Starting Address(base 16) | C80 | C81 | C82 | C83 | C84 | C85 | C86 | C87 |
-| Address (base 10) used by the HMI (SCADA) | 03201 | 03202 | 03203 | 03204 | 03205 | 03206 | 03207 | 03208 |
+|Address (base 10) used by HMI (SCADA) | 03201 | 03202 | 03203 | 03204 | 03205 | 03206 | 03207 | 03208 |
-===== Module ID Assignment =====
+===== Module ID (Modbus Slave Address) Assignment =====
 On the front of the module, there is a rotary switch labeled //ID//, that is used to select the Modbus slave address for the module. When installing multiple modules of the same type, the ID for each module should be unique.
 Rotary switch position 0 corresponds to Modbus slave address 10. If the ID is changed after the module is powered on, it must be power cycled for the new ID to take effect.
+[[modport:index|MODPORT]]